ZEVAC AG
Vogelherdstrasse 4
CH-4500 Solothurn

Tel: +41 32 626 20 80
Fax: +41 32 626 20 90
E-mail: info@zevac.ch

SSM 4A

For selective soldering and desoldering of Through Hole Technology applications. Reproducible results by operation parameters.
SSM 4A

TECHNICAL DESIGN

The SSM 4A is the medium machine version of the SSM series, it offers options like machine board holder support, cover, blow out system and connection to an external fume exhaust system. Reproducible results as parameters like solder temperature, cycle time, wave height, ramp up and down can be set to realize operator independent and reliable solder results. Footswitch control available on demand.

Application Range
Wave Height Adjustment

Preheater Module PH4
SSM 4A KEY FEATURES SUMMARY
  • FLEXIBLE SOLUTIONS
    for standard or odd shaped components
  • PROGRAMMABLE PARAMTERS
  • HEIGHT ADJUSTMENT
    easy height adjustment of the printed circuit board over the flow well
  • STABLE CONSTRUCTION
    easy to use and stable table top machine.
  • BOARD HOLDER
    even irregular shaped printed circuit boards up to 600x600mm can be fixed on the quick locking board holder.
  • BLOW-OUT OPTION
    to clean the solder joints after removal of a connector.
  • APPLICATION SPECIFIC TOOLING
    for any kind of component also on dense populated board, including multi soldering solutions, for wetting on defined positions.
  • PREHEATER MODULE PH4
    The standalone preheater module PH4 can be connected, especially for the increased lead-free requirements.
  • RETROFIT FOR LEADFREE
    leadfree retrofit for machines already in operation available.


Application range

For repair, prototyping, soldering, retrofit and small series production on the entire field of selective soldering and desoldering in the Through Hole Technology. Defective components can be removed and new components soldered in place even on dense-populated, mixed technology and / or multilayer printed circuit boards.

wave height adjustment

The height of the solder wave to the solder joints can be precisely adjusted to the required distance.

preheater module ph4

Also the selective soldering and desoldering machine SSM 4A can be combined with the standalone preheater module PH4 to preheat the printed circuit board smoothly up to the predefined working temperature.
NEWS
/en/aktuelles/meldungen/2018_SMT_en.php
/en/aktuelles/meldungen/2017_09_19_Productronica.php
/en/aktuelles/meldungen/2017_09_19_Enova.php

AWARDS
/en/awards/meldungen/2010_Zevac_recognition_award.php
/en/awards/meldungen/2007_ONYX_25_designpreis.php
/en/awards/meldungen/2006_ONYX_25_reddot.php
/en/awards/meldungen/2006_ONYX_24_good_design.php

top | print